30kw Hydro Blasting Equipment Water Jet Hydro Blaster For Rust
Surface Removing
Welcome to use LIFENG brand high pressure triplex plunger
pump,these series products are designed and manufactured by our
compony according to the advanced technology,with the advantages
are reasonable structure, stable performance, long life span,
simple maintenance and so on. suitability for industrial
clean,pressure testing,jet water into the oil field.
main feature:
- Designed for all-in-one transmission case and low speed, reasonable
structure,high reliability,can satisfy the long term continuous
operation!
- Compulsory lubrication system, effectively reduce power consumption
and parts wearing!
- High strength overloaded design, ensure big load requirements.
- Plunger core automatic regulate device
- Independent high pressure cylinder,rate of the stoppage low,simple
maintenance.
- Straight-line hydraulic end,avoided the stress concentration,
greatly improved the high pressure cylinders.
Installation of the high pressure pump
High-pressure pump power input shaft must be with power output
shaft center high equal, Connection mode is coupling.Power input
power must be higher than the high pressure pump power
rating,1450rpm, the rotary way must agree to the pump’s input end
mark.
High pressure pump power input size as right shown, the input shaft
coupling inside the area with the joint area should be more than
75%, The manufacturing precision of coupling should comply with the
requirements, also should make dynamic balance test,In order to
minimize the damage of high pressurepump vibration.
High pressure pump’s four fixing bolts should choose high strength
grade which should be tightened when installation.
After the installation of the high pressure pump, turn the coupling
with the hand, which should feel consistent, no resistance and
squeak& rattle phenomenon.
Pump’s inlet pipe must connect to the tank of water feed, according
to the water tank form is shown below.
Details:
1.Power end crankshaft housing is made by the cast iron.it is
stronger than the aluminium alloy.
2.Cross head is made by the Babbitt hard alloy.it has a long
working life for industrial design.
3.Hydraulic end pump head is made by the hard alloy 40Cr.it can
work continuously for cleaning jobs.
4.All hydraulic end is desgined for easy uninstall,so it is easy to
fix when the parts broken.
5.For some outdoor use purpose,we can make it driven by the diesel
engine or the gasoline engine.
30kw Hydro Blasting Equipment Water Jet Hydro Blaster For Rust
Surface Removing
Characteristics as below:
| MODEL | PRESSURE | WATER FLOW | POWER | Plunger Diameter | STROKE |
| Bar | L/min | KW | mm | mm |
| | | | | |
| LF-128/12 | 120 | 128 | 30 | 40 | 66 |
| LF-92/18 | 180 | 92 | 30 | 34 | 66 |
| LF-72/22 | 220 | 72 | 30 | 30 | 66 |
| LF-62/25 | 250 | 62 | 30 | 28 | 66 |
| LF-54/30 | 300 | 54 | 30 | 26 | 66 |
| LF-46/33 | 330 | 46 | 30 | 24 | 66 |
| LF-38/40 | 400 | 38 | 30 | 22 | 66 |
| LF-32/50 | 500 | 32 | 30 | 20 | 66 |
| LF-26/60 | 600 | 26 | 30 | 18 | 66 |
| LF-128/22 | 220 | 128 | 55 | 40 | 66 |
| LF-92/31.5 | 315 | 92 | 55 | 34 | 66 |
| LF-72/40 | 400 | 72 | 55 | 30 | 66 |
| LF-62/45 | 450 | 62 | 55 | 28 | 66 |
| LF-54/52 | 520 | 54 | 55 | 26 | 66 |
| LF-46/63 | 630 | 46 | 55 | 24 | 66 |
| LF-38/75 | 750 | 38 | 55 | 22 | 66 |
| LF-32/85 | 850 | 32 | 55 | 20 | 66 |
| LF-26/110 | 1100 | 26 | 55 | 18 | 66 |
Standard and custom high-pressure Hydro blasting machine units are
built with Tritan triplex or quintuplex pumps. Quintuplex and
triplex pumps are positive-displacement reciprocating pumps that
are configured with three or five plungers. High pressure water
pumps used in high pressure water blasting and water jetting
operations.
These hydro laser high-pressure water pumps can be driven by
electric motor, diesel, or gasoline engine. A complete system
package can be ready to easily take care of your next difficult
cleaning job.
Optional Equipment:
Hydro Dump Gun - Constructed Entirely of Stainless Steel.
Jet Tips - Stainless Steel: Two (2) Straight Round Pattern or Two
(2) Flat Fan Pattern.
Discharge Gauge.
Relief Valve - Stainless Steel Construction and Adjustable.
Discharge Hose - 50 ft Section
Units are mounted on trucks, trailers, or skids.
A variety of accessories are available to adapt to specialized
cleaning requirements. Hoses, Cleaning Guns, Jet Cleaning Heads:
Single Orifice, Multi Orifice, Flat Fan, Self-Propelled
Fulfill a multitude of cleaning applications:
Water Jetting, Water-Chemical Cleaning, Water-Sand Cleaning, Water
Power Sewer Cleaning & Flushing
Material that can be removed quickly, efficiently and cheaply with
a Hydro Laser: Paint, Grease, Sludge, Slage, Core Sand from Castings, Ceramic
Residue, Asphalt, Hydrocarbon Residue, Acid Residue, Mineral
Build-Up, Rust, Marine Growth, Polymerized Material, Latex, Scale
from Steel, Oil, Chemical Residue, and more...
As a 40 years manufacturing factory,we have many foreign customers
who came to our factory to visit.
some of the photos as below:
Applications:
it is widely used in ship cleaning,oil removing,fuel pipeline
cleaning in refinery fields.
some foreign customers give us comments below:
FAQ
30kw Hydro Blasting Equipment Water Jet Hydro Blaster For Rust
Surface Removing
Q1. What about the lead time?
A: 20 working days for mass production.
Q2. Do you have any MOQ limit for the product order?
A: Low MOQ, 1pc.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by sea shipping.
Q4. How to proceed an order for the product?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly:we sign a contract
Fourthly We arrange the production.
Q5. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.
