3DY600/40 Electric Hydro Test Pump Pressure Testing Pump For Safety
Valves For BOP
This pump is the horizontal single-acting triplex plunger pump, components are dynamic end, hydraulic end, pressure regulating valve,and relief valve!
(1).The dynamic end (attached picture by the following)componented by the pulley,
crankshaft, connecting bar , etc. dynamic power produced by the
belt and driving pulley and also decrease the speed.driving the
crankshaft rotary,and the connecting bar makes the rotary be
direct!
(2)The hydraulic end (attached picture by the following)componented by the
plungers,cylinders,pump body,water inlet and outlet valves,etc.the
cylinders are fixed on the crank,the connecting bar drive the
plunger do reciprocating movement in the cylinder which makes the
content of cylinders periodic change.when the plungers are the
sucking stroke,the the content of cylinders enlarge,and the water
outlet valves close,forming a vacuum,the medium comes into the
cylinders upon the pressure of the air;when the plungers are the
eduction stroke,the water inlet valves close,the plungers make the
medium go into the pump body through the water outlet valves,and
then go into the pressure regulate valve,and last comes out from
the high pressure hose!
(3)The relief valve (attached picture by the following) Relief valve is high-pressure
pump of protection device, when the nozzle blocking, relief valve
open, high pressure water flow, protecting the machine was not
damaged by the over pressure. the customers do not touch that!
(4)The pressure regulating valve (attached picture by the following)the pressure regulating valve
is used to adjust the outlet pressure and keep the system
pressure.when the handwheel clockwise rotation pressure-regulating
valve core, with the gap seat decreasing, overflowing decreases,
machine pressure increases. When the handwheel counterclockwise, flow capacity increase and the pressure drops!
3DY600/40 Electric Hydro Test Pump Pressure Testing Pump For Safety
Valves For BOP
Characteristics as below:
Product Description
The high pressure test pumps have two kinds of the usage,one is for
the high pressure cleaning purpose,and another is for pressure
testing purpose.Hydro Test Pump is an equipment which is used to
test the pressure of objects,the machine with high pressure water
jet by means of a power device. It can jet high pressure water jet
into the objects like the pipes,valves ,let the objects full of
high pressure water jet.to see if the objects water leakage or not
when the hydro test pump reach a pressure datas.this pump install a
stop checking valve,ti can stop the high pressure water jet comes
back into the pump.so the pressure can show on the pressure
gauge.the pressure test purpose can reach.
Features
This machine is made up of mainly by high pressure reciprocating
pump, power units and cleaning accessories etc.
High pressure reciprocating pump: the pump is horizontal triplex
plunger pump, driven by electric motor, made up of by power end and
fluid end.
- Power end: it is made up of by belt pulley(couplings), crankshaft
and connecting rod etc. Electric motor or diesel engine,or gasoline
engine driven the crankshaft and reduces its speed, and crank link
mechanism will change whirling movement to straight line
reciprocating movement.
- Fluid end: it is made up of by plunger set, high pressure cylinder,
pump body and water input and output valves etc. High pressure
cylinder is fixed on crankcase while connecting rod drives plunger
to do reciprocating movements, which make volume in cylinder do
cyclical change. When plunger is in-sucking stroke, the volume in
cylinder increases, water output valve closes, local vacuum is
formed. Working media enter into high pressure cylinder by going
against water input valve under high atmospheric pressure. When
plunger is in discharging stroke, water input valve closes, and
plunger transfer the working media to pump body by water output
valve, to pressure regulating valve, finally to high pressure spray
gun by high pressure hose.
Applications
The pumps are widely used in oil refinery pipes cleaning, heat
exchangers pipes cleaning, ship hull cleaing,oil paitings
removing,rust removing,etc.
Meanwhile, our pumps also can be used for the fuel pipelines
pressure testing,gas steel bottles explosion pressure testing,all
kinds of the tubes pressure explosion testing, and so on.
DY600/40 Electric Hydro Test Pump Hydraulic Testing Pump For Safety
Valves are working at foreign customers site:
From customers comments who is using the product DY600/40 Electric Hydro Test Pump Hydraulic Testing Pump For Safety
Valves:
the machines are testing the pipes pressure.
FAQ
DY600/40 Electric Hydro Test Pump Hydraulic Testing Pump For Safety
Valves:
Q1. What about the lead time?
A: 20 working days for mass production.
Q2. Do you have any MOQ limit for the order?
A: Low MOQ, 1pc.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by sea shipping.
Q4. How to proceed an order for the product?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly:we sign a contract
Fourthly We arrange the production.
Q5. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
